Programming the Raypak AVIA gas pool heater involves setting the desired temperature, activating different modes, and adjusting settings such as water flow, blower speed, and temperature range. Here are the steps to program the Raypak AVIA gas pool heater:
- Turn on the Power
Make sure the gas supply and electricity are connected to the Raypak AVIA gas pool heater. Turn on the power switch to activate the control panel.
- Set the Temperature
Use the temperature buttons on the control panel to set the desired pool temperature. The temperature can be set in increments of 1 degree Fahrenheit or Celsius. The default temperature range is 65-85 degrees Fahrenheit (18-29 degrees Celsius).
- Select the Mode
The Raypak AVIA gas pool heater has four different modes: pool mode, spa mode, boost mode, and vacation mode. Use the mode button on the control panel to select the desired mode.
- Pool Mode: This mode is used for heating the pool to the desired temperature. In pool mode, the heater maintains the set temperature range automatically.
- Spa Mode: This mode is used for heating a spa or hot tub to a higher temperature than the pool. In spa mode, the heater maintains the set temperature range automatically.
- Boost Mode: This mode is used for quickly heating the pool or spa to a desired temperature. In boost mode, the heater runs at full power for up to two hours before returning to the previous mode.
- Vacation Mode: This mode is used for conserving energy when the pool or spa is not in use. In vacation mode, the heater maintains the set temperature range but does not heat the water.
- Adjust the Settings
The Raypak AVIA gas pool heater has several settings that can be adjusted to customize the heating experience:
- Water Flow: The water flow setting determines the rate at which water flows through the heater. Use the water flow button on the control panel to adjust the flow rate.
- Blower Speed: The blower speed setting determines the speed at which air is blown into the combustion chamber. Use the blower speed button on the control panel to adjust the speed.
- Temperature Range: The temperature range setting determines the minimum and maximum temperature range for the pool or spa. Use the temperature range button on the control panel to adjust the range.
- Monitor the Heater
After programming the Raypak AVIA gas pool heater, monitor the unit for any errors or issues. The control panel displays error codes if there are any problems with the heater, such as a gas supply issue or a sensor malfunction. If an error code is displayed, consult the manual or contact a professional technician for assistance.
Conclusion
Programming the Raypak AVIA gas pool heater involves setting the desired temperature, selecting the mode, and adjusting settings such as water flow, blower speed, and temperature range. By following these steps, you can customize the heating experience and maintain a comfortable temperature for your pool or spa. Remember to monitor the heater for any errors or issues and contact a professional technician if needed.